StylAir Condensate Purifier: More Info
Back to Home Page

Back to Overview

"The StylAir SCP Condensate Purifier filtration is simple and effective!"

No Floor Space Required!

The Condensate Purifier requires no floor space. It is designed to be easily installed on or near the compressor cabinet or frame.

No Moving Parts

The Condensate Purifier has no moving parts, does not use electricity, nor does it require any maintenance. It is manufactured from translucent polypropylene.

Easy, Quick Replacement

As the trapped lubricants accumulate in the filter, the filter media changes color. When the color change reaches the replacement point on the filter, simply replace the unit with a new one. The lubricant/coolant remains in the filter, eliminating any spill or mess. The spent filter should be disposed of properly in accordance with local, state and federal regulations. The treated water exiting the condensate purifier ensures compliance with current EPA, DNR federal and state hazardous waste regulations.

Model

Compressor/
Aftercooler

Coalescing
Prefilter

"L"

 

SCP-10520

SCP-22560

SCP-37513

SCP-41500
(HP)

5 - 20

25 - 60

75 - 125

150 +
(SCFM)

up to 700

600 - 1500

1500 - 3000

3000 - 5000
 

15"

21"

31"

43"

All Models:

Maximum Temperature:
125 degrees Fahrenheit
 
Maximum Pressure:
15 PSIG
 
Housing:
Polypropylene

Connection Size:

3/4" NPT connection
(1/2" Hose Adaptors included)

Installation

The Condensate Purifier must be installed in a vertical position. The unit is marked with "IN" and "OUT" labels. The oily condensate from the compressor or other source enters the top of the filter and clean water is discharged from bottom. The discharge connection at the bottom of the filter must remain unrestricted to allow the water to drain without any backpressure.

The filter is easily installed by attaching the included mounting bracket to a nearby wall or to the compressor frame or cabinet. If the compressor is enclosed, the filter can be installed inside the cabinet maintaining a clean, OEM appearance.

We recommend plastic tubing be run from the compressor (or other source) condensate trap to the inlet of the filter. The same arrangement can be used for the discharge side.

Note: The Condensate Purifier is to be used with "no-air-loss" float drains ONLY! For best performance, a liquid only demand drain with a small reservoir that cycles frequently is best. StylAir's OA-111 series of electronic demand drains are the optimum choice.

Back to Home Page
Back to Overview

P.O. Box 7014
Plainville, CT 06062
info@stylair.com 

ph (800) STYLAIR
fax (860) 793-9730